Skip directly to content

1928 -1931 Absolutely Bitchin Ford Car Parts

 

 

1928-1931 Ford Car Parts

 Absolutely Bitchin Sheet Metal Parts

 

Bitchin Sheet Metal, Absolute Bitchin Sheetmetal, sheetmetal, sheet metal, vintage hot rod, Ford, custom sheet metal, custom hot rod parts, firewalls, floorboards, smoothie, running board, wheel tubs, wheel wells, wheeltub

 

 

Numbers correspond to pages in the pdf
to download a copy of the pdf for this section

go to this page 1928-1931 Ford Car PDF
 
Technical Info for Firewalls 
28-29 Firewall
30-31 Firewalls
Floorboards
Wheel Tubs
Check Out Our Super Saver Kits
Smoothie Running Boards  
 
2
2, 3
3
3
4
5
5

 

 

1


28 - 29 Ford Firewalls & Technical Information

The Set-Back Information Provided on This Page is for Your Information Only
These References Are to Help You Decide Which Firewall Kit Will Best Fit Your Particular Application.

There Are Many Factors Which Will Affect Your Choice of Kits. Engine Set-Back, Radiator Core Thickness, Air Conditioning or Superchargers. You Need to Determine The Length of The Engine Package You Intend to Install & Then Figure Out The Distance You Have From The Back of The Radiator Core to The Stock or Existing Firewall. By Doing This, You Will Know How Much Extra Room or Set-Back You Will Need. The Firewall Only Fits In One Place In The Body But Your Engine Can Be Moved Forward or Backward As Much As Needed to Obtain Proper Clearances.
If You Have Any Questions, Please Call Our Customer Service Line At (928) 420-6346

 

281000    $320
28- 29 Ford Firewall 


281002    $260
28-29 Lower Firewall Kit

281003    $110
28-29 Upper Firewall Kit

This is a Complete Kit Consisting of The Upper & Lower Sections. The Lip on The Upper Section Slides Over The Lip on The Lower Section Making a Very Smooth Edge. Measure The Set-Back From The Face of The Firewall Back as illustrated. The Lower Section May Be Used With The Stock Upper Section Which is Very Near The Stock Fuel Tank. Be Careful When Welding Near it. Yes,You Can Still Squeeze The Old V-8 Into Place. The Upper Section Can Be Used With The Stock Lower Firewall If You So Desire. Just The Thing If You Are Running a V- 6 & Want to Spruce Up The Engine Compartment.

The 28 & 29 Firewalls Were Among The First Products Manufactured By Bitchin Products® & Now By Us for The Street Rodder. The Upper or Lower Sections May Also Be Purchased Separately. Since The 28 & 29 Model a Cowl is Very Small, We Only Make One Set-Back Firewall Kit for these Bodies. These Firewalls Are Precision Built From 16 Gauge Cold Rolled Steel. Each Kit Comes Complete With All The Hardware Lists, & Instructions, Ready for You to Install. (We Also Manufacture Complete Front Floorboard Kits to Match Up to All Our Firewalls).

The Lower Section May Be Used With The Stock Upper Section Which is Very Near The Stock Fuel Tank. Be Careful When Welding Near it. Yes, You Can Still Squeeze The Old V-8 Into Place.

Need More Engine Room? This Kit Has it. This Firewall Has a 4 1/2” Set-Back From The Front Edge of Your Cowl. Remember, Your Stock Firewall Protruded 2”; Therefore, Our Total Set-Back From The Position of Your Stock Firewall is Now 6 1/2”.  This Firewall Has an Appropriate 2 1/2” Set-Back From The Cowl Front Edge. Remember, Your Original Firewall Protruded Forward 2” From The Edge of Your Cowl; Therefore, Your Total Set-Back From The Position of Your Stock Firewall Will Be 4 1/2”.

If You Have Any Questions, Please Call Our Customer Service Dept.  @ 928-420-6346

 

1928 -1931 Absolutely Bitchin Ford Car Sheet Metal Parts

2


 

The Set-Back Information Provided on This Page is for Your Information Only
These References Are to Help You Decide Which Firewall Kit Will Best Fit Your Particular Application.

There Are Many Factors Which Will Affect Your Choice of Kits. Engine Set-Back, Radiator Core Thickness, Air Conditioning or Superchargers. You Need to Determine The Length of The Engine Package You Intend to Install & Then Figure Out The Distance You Have From The Back of The Radiator Core to The Stock or Existing Firewall. By Doing This, You Will Know How Much Extra Room or Set-Back You Will Need. The Firewall Only Fits In One Place In The Body But Your Engine Can Be Moved Forward or Backward As Much As Needed to Obtain Proper Clearances.
If You Have Any Questions, Please Call Our Customer Service Line At (928) 420-6346

 

Bitchin Sheet Metal, Absolute Bitchin Sheetmetal, sheetmetal, sheet metal, vintage hot rod, Ford, custom sheet metal, custom hot rod parts, firewalls, floorboards, smoothie, running board, wheel tubs, wheel wells, wheeltub
 281000   $320
28-29 FORD FIREWALL
4” Set-Back 
 

301000   $350 

30-31 FORD FIREWALL
4 1/2” Set-Back 
 301005   $320 
30-31 FORD FIREWALL
2 1/2” Set-Back
This is a complete Kit Consisting of the upper and lower sections. The lip on the upper section slides over the lip on the lower section,making a very smooth edge. Measure the set-back from the face of the firewall back as illustrated. Need more engine room? This Firewall has a 4 ½” set-back from the front edge of the cowl.  Remember, the stock Firewall protrudes 2”, therefore the total set-back is 6 ½”.    This Firewall has an approximate 2 ½” set-back from the cowl edge. Add 2 inches for the stock Firewall protrusion and you have a 4 ½” set-back.

 


 

281000 
1928-1929 Ford Firewall 

301000 
1930-1931 Ford Firewall

301005 
1930-1931 Ford Firewall

(Standard Set-Back) 4” Set Back Then 20” Across & 25.5” Across

4.5” Set Back With 24” Then 27”.

2 1/2” Set-Back 1/2” Set-Back Set Back 2.5”  Then  20” Across & 24” Across

All Set-Back Measurements Are Taken From The Cowl Edge With The Stock Firewall Removed. Keep In Mind The Face of The Stock Firewall Protrudes About 2” In Front of The Cowl Edge.
 
Note: These Firewalls Are Designed for The Most Popular Engine-Transmission Conversion Which is Chevy Engine & GMC Turbo Transmission. Any Other Engine Installation (Ford, Mopar, Etc.) May Require Rework of The Bell Housing Area of The Firewall.
Remember, Your Original Firewall Protruded Forward 2” From The Edge of Your Cowl Will Be 4 1/2” All Set-Back Measurements Are Taken From The Cowl Edge With The Stock Firewall Removed.  Keep In Mind The Face of The Stock Firewall Protrudes About 2” In Front of The Cowl Edge. All Set-Back Measurements Are Taken From The Cowl Edge With The Stock Firewall Removed. 

 

1928 -1931 Absolutely Bitchin Ford Car Sheet Metal Parts

3


 

Save $49 on 30-31 Ford Coupe Saver Kit  301801
 SB @ $566 OR  BB @ $596

Includes
                (1) 301000 BB @ $350  Firewall                                                                                 

                          OR    301005 SB @ $320  Firewall     &     (1) 281014 @ $295 Complete Floorboard Coupe       

301000   $350
30-31 FORD FIREWALL
4 1/2” Set-Back  
301005   $320
30-31 FORD FIREWALL
2 1/2” Set-Back  
281014    $295
Need more engine room? This Firewall has a 4 ½” set-back from the front edge of the cowl. Remember, the stock Firewall protrudes 2” therefore the total set-back is 6 ½” . This Firewall has an approximate 2 ½” set-back from the cowl edge. Add 2 inches for the stock Firewall protrusion and you have a 4 ½” set-back.  

 

281005     $165
 
28-29 Ford Front
Floorboard Kit
281056    $112
 
28-29 Ford Pickup
Rear Floor Pan 
281006     $290
Complete Floor Kit
Fits 28-31 Door Sedan
Roadster Phaetons
28-29 Coupes
281014     $295
Complete Floor Kit
Fits - 30-31 Coupes 
281007 28-31 Ford Tranny Covers - 281008 28-31 Ford Under Seat Pan (Does Not Fit 30-31 Coupes) - 281009 28-31 Ford Pan-Behind-Seat (All Models) - 281015 30-31 Ford Under Seat Pan (Coupe Only) If You Want to Use Your Old Firewall & Floorboards / Floorpans, But Have a Problem With The Automatic Transmission Cover Not Clearing The Tranny, We Make an 18 Gauge Cold Rolled Steel Transmission Cover; it’s a Direct Bolt-In Part & Will Clear Auto Transmission With Ease.

 


281007 28-31 Ford Tranny Covers
281008 28-31 Ford Under Seat Pan
(Does Not Fit 30-31 Coupes)
281009 28-31 Ford
Pan-Behind-Seat (All Models)
 
281015 30-31
Ford Under Seat Pan
(Coupe Only)
 
281023     $280
28’-29’ Sedan or Phaetons
281024     $280
28’-29’ Coupe or Roadster  
301019     $280
30’-31’ Sedan
Our deep wheel well kits will help you eliminate tire interference often encountered with those wide pro-street tires, off-set wheels,independent suspension or normal body roll on sedans. Our wheel wells come in standard width of 8”. Deeper wheel wells can be special ordered for an additional cost of $35.00

 

1928 -1931 Absolutely Bitchin Ford Car Sheet Metal Parts

4


 

Save $49 on These Special Combinations
28-29 Ford Passenger
Firewall & Floor Kit
Roadster, Coupe, Sedan
30-31 Ford Passenger
Firewall & Floor Kit
Roadster & Sedan
Ford Passenger
Firewall & Floor Kit 
 Coupe
28-29 Ford Kit 281800  $561
Includes:
(1) 281000 $320 Firewall
(1) 281006 $290 Rear Floorboard 

 30-31 Ford Kit 301800  $561 / $591
Includes:
(1) 301000 $350 or 301005 $320 Firewall
(1) 281006 $290 Rear Floorboard 

Ford Kit  301801  $561 / $591
Includes:
(1) 301000 $350 or 301005 $320 Firewall
(1) 281014 $290 Rear Floorboard

 

We Manufacture One of The Nicest Smoothie
All Steel Running Boards on The Market Today.


281055 $250 28-29 Ford
Smoothie  Running Board Kit

301022 $250 30-31 Ford
Smoothie Running Board Kit

It is Made Out of 16 Gauge Cold Rolled Steel & is a Quality Piece of Work. The Fit & Detail is Superb & If Your Project Demands The Best. These Running Boards Will Fill The Bill. As Always We Manufacture All of Our Parts In Our Chino Valley, AZ.

1928 -1931 Absolutely Bitchin Ford Car Sheet Metal Parts

5


To download a copy of the pdf for this section go to this page 1928-1931 Ford Car PDF

You Can Call Us To Order during business hours 928-420-1254
or download a copy of our PDF Order Fax Form and Fax It To 928-277-4581

or Email Us With Your Request To sheryll@absolutesheetmetal.com

We Accept Most Cards Including American Express, Money Orders.

To Request A Free CD Of Our Catalog You Can E-Mail A Request To 
sheryll@absolutesheetmetal.com

or download a copy of our PDF Order Form 
Fill Out & Mail The Form To:

Absolute Sheet Metal, LLC
2420 West, Road 2 South

Chino Valley, AZ 86323